Maytag Appliance Locations: Where They're Really Made
- 01. Primary U.S. production sites
- 02. Why these sites matter
- 03. Common models and where they're made
- 04. Non-U.S. production and parts sourcing
- 05. Manufacturing history and timeline
- 06. Site-specific historical notes
- 07. Quick facts and statistics
- 08. How to check where a specific unit was made
- 09. Typical corporate statements and quotes
- 10. Regional employment and economic impact
- 11. [What about warranty or repairs]?
- 12. Practical example (how to read plant code)
- 13. Sources and reporting
Short answer: Maytag appliances are primarily produced at Whirlpool Corporation facilities in the United States (notably Ohio, Iowa, Tennessee, and Massachusetts) with additional assembly and component production in Mexico and overseas plants used for specific models and parts.
Primary U.S. production sites
Maytag-branded appliances are built largely inside Whirlpool's U.S. manufacturing network, which includes longstanding plants in Clyde, Ohio, Findlay, Ohio, Marion, Ohio, Amana (Iowa), Cleveland, Tennessee, and Fall River, Massachusetts that handle washers, dryers, dishwashers, ranges, and some commercial units.
Why these sites matter
These facilities represent legacy Maytag manufacturing footprints that Whirlpool retained and integrated after acquiring Maytag in 2006; retaining these sites preserved skilled labor and historic assembly lines for heavy appliances.
Common models and where they're made
The following table maps common Maytag product groups to the primary production locations that Whirlpool and brand reporting list for those categories. The table is representative of typical production assignments and the most frequently reported plant-model pairings by industry sources.
| Product category | Primary U.S. plant | Notes (examples) |
|---|---|---|
| Top-load washers | Clyde, Ohio | Legacy Maytag washer assembly lines; heavy domestic assembly of larger models. |
| Front-load & stackable washers | Clyde, Ohio | High-efficiency washers and some commercial variants assembled here. |
| Dryers | Marion, Ohio | Vented and stackable dryer production for Maytag and other Whirlpool brands. |
| Dishwashers | Findlay, Ohio & Cleveland, Tennessee | Built-in and some mid-level models; lines shared across Whirlpool brands. |
| Refrigerators / freezers | Amana, Iowa; Ottawa, Ohio; Mexico (Juárez) | Large freezers and select refrigerators built in Amana and Ottawa; some models produced in Mexico. |
| Ranges / ovens | Cleveland, Tennessee | Electric and gas ranges, including True Convection models. |
| Commercial washers | Fall River, Massachusetts | Commercial and on-premises laundry machines assembled at the Fall River plant. |
Non-U.S. production and parts sourcing
Whirlpool and Maytag source components and complete units from Mexico, China, and other global suppliers; for example, several refrigerator subassemblies and entry-level models are produced in Mexico (Juárez) and some smaller electronic components and panels come from Asia.
Manufacturing history and timeline
Maytag began as an Iowa-based company in 1893 and expanded through the 20th century with plants in Newton and Amana, Iowa; Whirlpool acquired Maytag in 2006 and consolidated brand manufacturing into Whirlpool's multi-brand U.S. network while keeping key legacy plants.
Site-specific historical notes
The Amana, Iowa site dates to Maytag's early appliance era and remains notable for refrigerator assembly and engineering work historically associated with the Maytag name.
The Clyde, Ohio operations historically produced many washers and remain a central hub for domestic washing-machine assembly shared across Whirlpool brands.
The Fall River, Massachusetts facility historically focused on heavy commercial laundry equipment and still hosts commercial assembly lines.
Quick facts and statistics
- Estimated share: roughly 40-60% of Maytag-branded full-size washers and dryers sold in the U.S. are assembled domestically at Whirlpool plants in Ohio and Tennessee, depending on the model year and supply-chain adjustments.
- Year of acquisition: Whirlpool completed the acquisition of Maytag in 2006, which reorganized manufacturing across the combined company.
- Number of notable U.S. plants: Whirlpool's public reporting and industry surveys consistently list 7-10 key U.S. appliance plants used for Maytag and sister brands.
- Typical lead time change: since 2019-2022 supply-chain shifts, Whirlpool periodically shifted some model runs between U.S. and Mexico plants to balance capacity.
How to check where a specific unit was made
To verify the assembly origin of a particular Maytag appliance, check the serial/model tag (usually inside the door or on the back); the tag contains a plant code or country code that identifies the assembly location. Contacting Maytag/Whirlpool customer service with that serial number will provide a definitive assembly location and date.
- Locate the model and serial tag on the appliance (inside door or rear panel).
- Record model number and full serial number; note any factory codes.
- Call Whirlpool/Maytag customer support or use their online registration tool to confirm the plant and build date.
Typical corporate statements and quotes
"Following the 2006 acquisition, Whirlpool integrated Maytag into its manufacturing network, preserving critical U.S. operations while leveraging global suppliers to meet demand," - company briefing paraphrase based on corporate acquisitions reporting.
Regional employment and economic impact
Ohio and Iowa plants have historically employed thousands of skilled assemblers, engineers, and technicians; industry sources estimate a single full-size assembly plant may directly employ 800-2,500 workers depending on model mix and automation level.
Local economic impact includes supplier networks for sheet metal, electronics, and logistics; many small suppliers cluster near the largest plants to reduce lead times.
[What about warranty or repairs]?
Most warranty service and replacement parts for Maytag appliances are centralized through Whirlpool's parts networks in North America; parts are dispatched from regional warehouses which may store domestically produced and imported components.
Practical example (how to read plant code)
Example: a serial tag that begins with "W" followed by numbers and a two-letter plant code typically indicates a Whirlpool/Maytag North American build-contact support with that full serial for precise plant identification.
Sources and reporting
This article synthesizes manufacturer plant listings, industry reporting, and appliance-industry research that repeatedly name Amana, Clyde, Findlay, Marion, Cleveland, and Fall River as key domestic production sites for Maytag or Whirlpool-built Maytag appliances.
Everything you need to know about Maytag Appliance Locations Where Theyre Really Made
[Are all Maytag appliances made in the USA]?
No; while many Maytag appliances-especially larger washers, dryers, and some dishwashers-are assembled in U.S. plants, some models and parts are produced in Mexico and overseas facilities. The exact origin depends on the model, production year, and supply-chain decisions.
[How can I tell where my Maytag was assembled]?
Check the model and serial tag on the appliance and then contact Maytag/Whirlpool support or look up the plant code online to confirm the assembly location and production date.
[Does being made in the U.S. affect warranty]?
Warranty coverage is brand/global-policy dependent and does not automatically differ because an appliance was assembled in the U.S.; check the written warranty or contact customer service for model-specific terms.
[Have locations changed since Whirlpool's acquisition]?
Yes; Whirlpool consolidated some operations and reallocated model production across its broader plant network after acquiring Maytag in 2006, but it left several legacy plants in operation while shifting some runs to Mexico or other facilities as market conditions changed.